almost done but few things confuse me

[mickey]

I finally put my motor in and mostly i got everything connection. Few wire harness are not connection because i have no idea where it belong. So i turn my key to crank it. it crank but it have no spark. I cant find where is the crankshaft sensor on the 420a. Also on this picture, you see there 3 things that need to be done. One is the evap hose ( i have no idea where that goes), tiny evap hose ( i dont know where that goes either) and last one is intake manifold sensor. i cant find where the wire harness for that. I check every plug but it not there.

 

[rydereclipse]

The crank position sensor on a 420a, i believe, is an inch or so above the oil filter location. The two smaller hoses, if they are evap, and I remember correctly, I capped off.

It would make since it didnt get going if you didn't have that MAP sensor plugged in. You can always go to a boneyard and cut the pigtail out and rewire it in to yours if you have to.

 

[Diamond Star Werks]

Ckp on 420a is right above the oil pan right behind the crank pulley on the firewall side. The map sensor plug should be with the injector harness. Its probably under the IM.
There should be a black box under the IM as well for vacuum lines but that one looks broke?

 

[mickey]

The crank position sensor on a 420a, i believe, is an inch or so above the oil filter location. The two smaller hoses, if they are evap, and I remember correctly, I capped off.

It would make since it didnt get going if you didn't have that MAP sensor plugged in. You can always go to a boneyard and cut the pigtail out and rewire it in to yours if you have to.

okay thank you. I have no spark when i try to crank. i dont know why. I have to find wire harness for map sensor to turn on the car right? im not sure.

Ckp on 420a is right above the oil pan right behind the crank pulley on the firewall side. The map sensor plug should be with the injector harness. Its probably under the IM.
There should be a black box under the IM as well for vacuum lines but that one looks broke?

Thank you, So these two small evap hose is to suspost to connection to black box right?

 

[fisher83]

The little hose is either from the egr valve/solenoid or from the vacume box to the cruise controll if you have it. I agree with those guys that the map sensor pigtail is probably somewhere under you harness that runs along the back side of your valve cover.