Adapting the 1g bov to a 2g

[NWHTanK]

Was out in the garage and ran into a small problem. The 1g bov didn't fit the return hose. So I came up with this . I cut the snout of the 2g bov and slipped it over the 1g bov. Now I have to figure out a selant to complete it. It is a tight fit and the a hose clamp might suffice.

 

[RadDsm]

If you tighten the worm clamp enough, it'll fit fine. You could try some rtv between the 2g plastic piece and bov if you really want to do it that way.