Adapter for thermostat housing barb to AN lines

[Vegas Smith]

Is there an adapter out there that will connect the 3/8 coolant feed barb to an AN line?

You must be logged in to view this image or video.

 

[Jerzm3]

Should be able to source from mcmaster carr

https://www.mcmaster.com/bspt-to-npt-pipe-fitting-adapters/type~reducing-adapter/

 

[19Eclipse90]

https://www.pegasusautoracing.com/productselection.asp?Product=3230

Though I'd be a little weary because they only specify BSP and not BSPT threads, the former I'm assuming to be parallel and not tapered. But it's a direction.

Edit: Aha!!
https://www.extremepsi.com/store/Extreme-PSI-4AN-to-3-8-BSPT-Male-to-Male-Fitting.html
https://www.extremepsi.com/store/Extreme-PSI-90-Degree-4AN-to-3-8-BSPT-Male-to-Male-Fitting.html

 

[Vegas Smith]

I realized it would be easier if I just bocked off the natural coolant turbo feed nipple and used port # 2 right next to it. Thanks for help guys.