acufab # inch TB?

[gotgrip666]

i was reading about this 3 inch accufab throttle body that some get when they get aftermarket intake manifolds on thier 4g63, my question is does anybodt know in particular what TB it is like if i wanted to order it? can anybody give me a link?

 

[gSx_r1der]

get a 1g tb, take it to machine shop bore it out to 63mm do the half shaft mod and your at about 2 3/8-2 1/2 and that is decent enough for your 4g motor, or more than youll need I should say.

1g tb =$55(mine was, got it here on the trader)
Boring+half shaft mod =$100
Porting IM =free(for me at least so if you dont have one get a die grinder)
http://search.ebay.com/air-die-grinder_W0QQfromZR40QQfsooZ1QQfsopZ1QQsojsZ1QQssPageNameZWLRS
and install =free
http://roadraceengineering.com/2gtbswap.htm

 

[spoolup]

also try a search (both here and on google) about shaft breakage from accufab TB, I have seen people replace them one after another while some others have had outstanding success. Here is a link at AEM about the problem and one fix. Bear in mind the TB does not utalize the stock sensors so some sort of ECU contorl will be needed to compinsate. Seeing you have DSMlink, there is plenty of info there about this TB as well.

Link as promised: http://forum.aempower.com/bbs/viewtopic.php?t=13231