95 AT swap to a MT

[jonridinhi]

I got a 95 talon ESI Automatic non-turbo. My tranny went out. I can get a 97 Eclipse non-turbo with a manual trans for cheap and i was wondering will that car have everything needed for the swap and the difficulty of the swap. I am not new to cars just DSM's. Thanks for any help in advance.

 

[stevestevesteve]

search maybe?

 

[jonridinhi]

I have read and found yes and then no between websites because of the pins on the ecu. I know it will bolt it is just ECU wise. Sorry not that lazy.

 

[jonridinhi]

Also i see alot for the 4g63 but the 420a dose not seem to have as much (or any) info.

 

[toxicity883]

2gnt has a very detailed guide, heres the link
2GNT.com - ATMT

 

[jonridinhi]

Found this but it still dose not answer the ecu question of weither i have to switch and if i do are the pins going to mach from 97 to 95.

 

[jonridinhi]

So i picked up and 97 donor car. The donor is gutted 95% at this point. All i got to do is harness and shift cables then i can built the 95. Mods.... if i do a how to on this can you move it to the how to upon competion?

 

[rush2252]

2Ga and 2gb ECUS are different as are the connectors on several components.

 

[96_killer]

95 to 97 ecu won't work, different pins and connector to swap out the hole harness that sounds like a pain to do

 

[interex]

You won't need to worry about the ECU when putting a manual in the car. You might get a CEL from the TCM but that's about it. Just swap the transmission, install the clutch, shifter, and be done with it.