The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

95 gst swap

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

braindedracr

Probationary Member
0
0
Aug 14, 2008
staten island, New York
I have a 95 sebring n was wondering if a gst swap fits I was searchin around but couldn't find nething only that the eclipse talon sebring n avenger parts r basically the same. I've seen a gsx swap in a sebring so I no that fits but don't noe if the gst does ne info thx
 
Your writing is very hard to understand.

Its really not worth it. It would be more reasonable to buy a gst. Im sure it can be done, but like I said its just not worth it.
The gst and the gsx both use a 4g63. The gst is fwd and gsx is awd. But the eclipse gs, avenger, sebring, ect. all use a 420a. So the thing is that your swaping a totally different engine in. Alot of fabrication will be needed. Theres write ups for swapping a 4g63 into a eclipse gs, find that and it will help you.
 
its not that hard 2 understand I'm jus wonderin if the motor bults up the same I aint into this dsm stuff ima honda person I've had a 11 sec honda which I sold n my step pops gave me his car ### he bought a charger so as a new project I was wonderin since the sebring is fwd n the gst is fwd it wouldn't b that hard of a conversion I would b doin the swap myself at my garage I have a lift n all tools n everything need 2 work on a car I swaped plenty of motors n I'm still young but this will b my first non honda project I noe it would b a very expensive project but it would b rare.
 
Ther will will be a little work with the engine mounts, 420a or the 2.5l v6 have slightly different mounts. The 4g63 has different locations for its engine mounts, and yes you can swap them out. The only issues will be the engine mounts.
 
It more complicated then that. The 420a is totally different from the 4g63, its not just going to drop right in and bolt up. I've read that you need to be prepared to spend over $5,000 to do this and its extremley, extremley time consuming. The engines are opposites of each other, mounts are in different location, trannies wont line up, ect.......

Try searching this has been covered a billion times.
I will try and find some good links for you

http://www.dsmtuners.com/forums/420a-turbo-conversion/223701-gs-gst-what-parts.html

Actually: For anyone that has a 420a and wants to swap in a 4g63... - Team-2G Mitsubishi Forum
thats a list of a whole bunch of threads

There all saying the same thing, dont waste your time.
 
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top