The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

420A 4th and 5th gear popping out

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lsotto_2005

Probationary Member
12
0
Jun 30, 2012
Virginia Beach, Virginia
Ok, In my 97 eclipse with NVT-350 I have the following problem.

4th and 5th gear continue to pop out unless I hold the gear regardless of the following:

The tranny was opened, the syncros keys on 3-4/5-R gears were replaced with their springs. The shift arms were inspected and they still were in good condition as well as the Sync rings. All the gears are in good shape, no broken off teeth.

Once re-installed on the car, one shift cable was replaced that had bent and the boot was torn up. The TOB was replaced.

The car shifts into the gears very smooth, and has no problem on 1st,2nd,3rd and R gear. They all stay in. I do have to say that before replacing the parts mentioned above, it needed a ton of pressure to hold the 4th and 5th gear in place. But now its barely needs any, and it will hold the gear but if I apply to much load with the gas peddle it pops out.

I'm out of ideas and will to continue guessing.

Any Ideas as to what might be the culprit will be greatly appreciated?
 
Saw the thread, seems to me its related to either the 4g63 or AWD tranny, not the 420a engine tranny. I have no big bolt to go to.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top