420a power steering

[P1za]

So im just putting my car back together after like 2 months and i cant seem to remember how my power steering unit goes on. I did the timing belt and all. I dont remember how the mount goes on the block and other little things. I have searched a lot on google but seems like i am unlucky. Any help is appreciated!

 

[scottyhops]

there is one bolt thats on the left side does into the block. a bolt under the top of the ps bracket. and a long bolt on the right side. then you use 3 bolts on to the power steering. place the belt on with the tensioner down under it min in. then pull power steering pump back to make tension tighten all bolts then to the tensioner

 

[P1za]

there is one bolt thats on the left side does into the block. a bolt under the top of the ps bracket. and a long bolt on the right side. then you use 3 bolts on to the power steering. place the belt on with the tensioner down under it min in. then pull power steering pump back to make tension tighten all bolts then to the tensioner

Thanks very much! But I figured out why it wouldn't fit. My motor mount and bracket thing were still off

 

[scottyhops]

Thanks very much! But I figured out why it wouldn't fit. My motor mount and bracket thing were still off

that will get you! the 3 bolts are a pain to put back in. i had to jack my motor up and down and one more click and basically it was like but after 2 times of pulling the head off you get used to it