Resolved 2G Motor mount spar bolts

[Dragon 3259]

Hey guys I need some help again here. Does any of you know what size bolts and what type of bolt holds the front spar for the front motor mount. The ones that I have unfortunately snapped at threads and the whole spa came down they had to be drilled out and I have no idea what size they were I know they are different sizes it'll be the very back too the one in the middle and the very far back. I will attach a picture of The spar that needs the bolts for it if anyone can help me with that that would be wonderful. I was searching around on the app here and in our QA section and I couldn't really find anything unless I missed it or overlooked if any of you know possibly this would be wonderful for help.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[steve]

You're looking for the two front bolts for the crossmembers on a 98 420A?

 

[Dragon 3259]

Middle and back bolt

I have the very front two with the rubber on them it's the other two I am needing to know about those two snapped on me.

 

[19Eclipse90]

Suspension Bolt/nut sizes.

Both M10 x 1.25mm pitch. One is 45mm long; the other 75mm.

You must be logged in to view this image or video.

 

[Dragon 3259]

Thank you so much that really helps a ton. Was that in the thread list I didn't see it.

 

[19Eclipse90]

The diagram I posted is from the PDF found here: 2G Eagle Talon (and Chrysler Sebring, Dodge Avenger) Factory Parts Catalog 1995-1996, 1997-1998

The link I supplied in my first post was easily found in other threads when searching “crossmember bolts” with the Titles Only option selected.

 

[Dragon 3259]

I didn't think of that one. I need to think more simple thanks for letting me know. Sometimes I get a bit ahead of myself.