javier347
20+ Year Contributor
- 92
- 0
- Oct 28, 2004
-
Valrico,
Florida
Had the head resurfaced for a new build and overall the head seems to measure to 5.160 which is well below the limit. I have searched the forums and some have said that this is not that big an issue but figured i would ask for some advice here. Need to order a new head gasket along with some ARP's etc and would like to know if a felpro composite head gasket is ok or would i have to compensate with a 1.6 Cometic HG ( 0.066 ).
Head has Crower 272, Crower Springs and Titanium retainer, 1mm oversized valves
Intake Front = 5.1605
Intake Rear = 5.1625
Exhaust Front = 5.160
Exhaust Rear = 5.162
Head has Crower 272, Crower Springs and Titanium retainer, 1mm oversized valves
Intake Front = 5.1605
Intake Rear = 5.1625
Exhaust Front = 5.160
Exhaust Rear = 5.162
