2g fp oil supply line

[95Dsm22]

Has anybody used a 2g oil supply line from FP and also the -4 FP An inline filter ? Any opinions?

 

[Boomdeeze]

I used it on my last setup, a Borg S259 ETT. I fed it off the OFH using the red inline filter, was a great combo. I put that setup through a lot boosting 35 psi to 9.5k.

 

[95Dsm22]

That's what I plan on doing but on a small Garret , how long did you have it on the car ? And how often did you have to check it ?

I used it on my last setup, a Borg S259 ETT. I fed it off the OFH using the red inline filter, was a great combo. I put that setup through a lot boosting 35 psi to 9.5k.

 

[usmcjay]

I have the fp 4an inline filter. I order to place it where fp reccomend Its right after the 90 degree connector on the ofh then the oil feed line connects to it.

 

[Boomdeeze]

I had it on the car for a one year and after I checked it, it was clean. Didn't really expect to get anything in it unless I had a failure somewhere in the engine to cause debris. I had a -10an drain line and never had an issue of over/under oiling.