1gen brakes

[vtracer20]

Well i decided today to do some matinence stuff on the car and brakes where a biggy. The rotors are pretty much shot and so are the pads. I took off the caliper without much trouble except after nailin my elbow into something. i then decided to use the airgun. I dont know how to take off the rotors though, i looked on vfaq and it says to screw a bolt into the holes but i checked on my rotor and i see nowhere, where a bolt would screw on. please help thnx. Oh yeah pics would be great help too. Thanks
Jakub

 

[carwizard1]

Just hit the thing firmly with a hammer until it pops off. Especially if your replacing the rotor.

 

[vtracer20]

okay so stupid ?, when i put the new one on what holds in on there? There are two bolts but im not sure if their holding on the rotor onto the cvjoint or do something else

 

[wortdog]

okay so stupid ?, when i put the new one on what holds in on there?

The wheel holds it on.

There are two bolts but im not sure if their holding on the rotor onto the cvjoint or do something else

Assuming your car has ABS, I believe you're talking about the bolts that hold on the ABS ring. You do not need to take those bolts off to get the rotor off.

 

[vtracer20]

okay got them off...was easier than i thought...thnx