1g N/T head

[camfast]

Can i use a 90-92 non turbo head for my 6 bolt block? A few people told me that i can use the N/T head and all i would have to change out is the cams from the 1g turbo head and everything would bolt up fine, is this true?

Also are there any pros/cons by running a N/T head? Are the heads the same?

 

[HIGHPSI4]

I would change out the valve springs too. It has been said that the springs are the same however I had a friend that floated the valves on his turbo swapped nt head.

 

[jrohner]

The only difference between the turbo and non-turbo heads is the cams are slightly different.

 

[camfast]

I would change out the valve springs too. It has been said that the springs are the same however I had a friend that floated the valves on his turbo swapped nt head.

Cool, other than that was everything the same?

 

[camfast]

The only difference between the turbo and non-turbo heads is the cams are slightly different.

Ok, thanks. I have the cams already so i can just swap the out and add the 3g lifters while i am at it.