16g oil line issue

[Macspsi]

So finished up everything on my 16g install only to have one issue. I have a oil leak right on this nut by the steel braided line. I have been tightening it well trying to for nearly an hour. Starting to think that it's stripped, but is there anything I can do before i start taking the turbo back off?

 

[Seamus]

i can't tell from the picture, did you install new crush washers? it doesn't look lik eit.

 

[Macspsi]

That's what it is

 

[Diamond Star Werks]

Get new crush washers and verify its not bottoming out. Some ebay fittings are too long. Idk what kit you have.

 

[Macspsi]

About to order them now. What size are they

 

[Macspsi]

Its extremepsi. I just need to know the size of them 10 12 or 14

 

[Macspsi]

I just ordered every size they have on extreme psi just to be sure thanks!

 

[Diamond Star Werks]

Haha that works. For my 14b i just bought the kinguwa install kit.

 

[Seamus]

you need 2 m12's

 

[curt-s]

Its extremepsi. I just need to know the size of them 10 12 or 14

Somewhere on these engines you'll use them all, always good to have spares

 

[Seamus]

did you use ther crush washers on the waterlines and the feed line at the head? It'll leak form there also if you didn't.

Also, be gentle with that feed at the head. It's soft.

 

[68442]

Should be able to get them at most auto parts stores.