The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

IMG_5655.jpeg

Street Build 98 GST Revival Street Build

Going for a semi-fast and reliable street car that I can take to meets and keep the DSMs alive.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Here’s one I picked from a ‘98 non-turbo (cannot recall if it was a Spyder, but I know I ran across a few of those throughout the years):

IMG_9805.jpeg


IMG_9807.jpeg


So, maybe the FWD pump connection design changed at some point, 2Ga - 2Gb. Or, maybe, FWD turbo vs. non-turbo.

The one in the RockAuto screen shot is 1995-1997. Later models, ‘98-‘99, have the fuel tank differential pressure sensor (black sensor) on the hanger as well. Looks like that “extra” bolt is non-standard way of mounting that sensor to the hanger.
 
I believe that is an aftermarket replacement pump hanger like this one. The electrical connector is damaged on yours, and I would use different worm screw style hose clamps to make sure there is enough clamping force on the connections
I just changed over to the worm style clamps, I also thought that maybe a leak point after I thought about it. The connector that's damaged is the differential pressure sensor thing for the EVAP system. I deleted the EGR stuff so I don't think that needs to be plugged in anymore.

IMG_7184.jpeg
 
Well, it's been a while since the last update...

I fixed the fuel delivery issue with a new in-tank fuel pump connector. She started right up when I replaced that! Since she was running again, I contacted McKenzie Lange for a remote tune.

I tried to rebuild my throttle body as well, since that was WAY overdue, but ultimately failed at doing so because none of the guides I watched included how many turns to turn the return spring. So I sent that out to Shaun Werning at AO Customs! And wow, he does awesome work... I opened up the package, and my jaw literally dropped. I was so blown away at how good the TB looked now.
IMG_7279.jpegIMG_7281.jpegIMG_7283.jpeg

Then, McKenzie sent over some tunes, and I mayyyy have made a gross oversight on the boost controller lines...
IMG_7464.jpegIMG_7463.jpeg

AEM widebands are trash....
So naturally I ordered up a new AEM X-Series Wideband to replace the "classic" wideband I had in there. These are a pain to calibrate correctly, but McKenzie said it was fine to just put the default voltage values that AEM gives you in there, so that's what I did!

My Megan Racing Downpipe got some holes blown through the flex pipe, so that got fixed, and honestly it sounded louder out the back afterwards.
IMG_8414.jpeg

Had some issues with crankcase pressure! Oil would blow out the dipstick and the oil cap seal around 6000 rpm. This made a HUGE mess everywhere in the bay, of course, because why would this car make anything easy on me? So I cleaned everything up, and found a vented catch can for sale at The Shootout, along with Forced Four Fab's oil cap vent. I ended up just going with the dual sealed catch can setup that is popular from the "Improved PCV Setup" thread and buying the STM Sprung dipstick tube, and now she's not blowing out oil from any seal.
IMG_8415.jpegIMG_8416.jpeg

More updates to come!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top