The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Will this head fit my car?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I dont see why not ive used a non turbo head on my engine before, i believe the cams are the oinly difference but if if says it will fit then it will. I would also email the seller to confirm it though since your looking to purchase it from them.
 
Jumped timing and bent some vavles and not sure what else. My mechanic said i was better off getting a used head.

Lash adjusters?
 
Had that happen on my old GS-T. Cost me the same price to rebuild it with new valves. Check that you didn't bend any pistons too. I don't see why you'd need an entire new head just to swap a few valves...
 
I would go on ebay and grab some valve guides and SS valves (not oversize) off of enginebldr (think that is his name), then just get a head shop to reassemble everything for you. Probably will be the same cost and less risk as finding some old used head with unknown mileage and issues.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top