2G what type of pins should i order for ecu and other plugs

[TheFlashDSM]

im remaking my 2g dsm harness from scratch, and im finding all the plugs and pins as a kit, but i dont need that. im reusing all the plugs and i need to know what type of pins i need (type-part numbers-websites)

lets make this a good informational thread for others as well please. i will also add some of the answers to my wiring information thread as well
https://www.dsmtuners.com/threads/2...ecu-pinouts-diagrams-tcu-diagrams-ect.528552/

thanks guys!!!!

 

[dustyboner]

all i know is that the ecu uses TYCO AMP pins.
steve would know.
He's like a super hero. He shows up at the last minute to save the day.
Just wait and you'll see what i mean.

 

[brads]

Molex pins aren't used in most of the connectors, I wouldn't suggest trying to make them fit.

If you are going through the expense of building the harness, a few extra bucks per connector to replace at least the ones that are close to the engine and get cooked over time, is good insurance.

This link has lots of pictures of the connectors, and some part numbers. The links to where to buy them mostly go to a company no longer in business. But you might be able to find what you need:

2G - 2g DSM Engine Bay Electrical Connections

This article is designed to help 2g owners identify all the plugs in the engine bay.The photos and wire colors were based off of a 1999 Eclipse GSX, so other years and models may vary in location and wire color.I would like to give a HUGE thanks to turbosax2 for helping with the photography...

www.dsmtuners.com

 

[TheFlashDSM]

all i know is that the ecu uses TYCO AMP pins.
steve would know.
He's like a super hero. He shows up at the last minute to save the day.
Just wait and you'll see what i mean.

hopfully he can

Molex pins aren't used in most of the connectors, I wouldn't suggest trying to make them fit.

If you are going through the expense of building the harness, a few extra bucks per connector to replace at least the ones that are close to the engine and get cooked over time, is good insurance.

This link has lots of pictures of the connectors, and some part numbers. The links to where to buy them mostly go to a company no longer in business. But you might be able to find what you need:

2G - 2g DSM Engine Bay Electrical Connections

This article is designed to help 2g owners identify all the plugs in the engine bay.The photos and wire colors were based off of a 1999 Eclipse GSX, so other years and models may vary in location and wire color.I would like to give a HUGE thanks to turbosax2 for helping with the photography...

www.dsmtuners.com

yea i know where to get the connectors, all mine are good, i just need to know what type of pins, i though they where molex but i guess not . lets see what we can make from this thread, since there is nothing on here about it!

 

[brads]

Do you need the little rubber wire seals on the back of the pin, or are you hoping to reuse those too?

There are a few common pins(male or female terminals is a better name) in the harness. The link to the 2G harness I gave can help you ID them, so you can figure out how many of each you need.

Many of the places that sell connectors also sell the terminals. I think conector kits are only $100, with a bunch of various terminals at extreme psi

 

[TheFlashDSM]

Do you need the little rubber wire seals on the back of the pin, or are you hoping to reuse those too?

There are a few common pins(male or female terminals is a better name) in the harness. The link to the 2G harness I gave can help you ID them, so you can figure out how many of each you need.

Many of the places that sell connectors also sell the terminals. I think conector kits are only $100, with a bunch of various terminals at extreme psi

none of the links work on that post, hence why im asking, pins are super cheap everywhere i look, i just need to know what type i need and i will order 100 of each and i dont need the rubber inserts either, just the pins, but i guess i will have to google every type of plug that i need and see what pins they have, unless someone all ready knows? i did send an email to ohm racing about this, im just waiting for their responce