walbro 255 wire question?

[mheidemanjr]

ok i ordered the walbro 255 and was looking at the pick and the connector only has 2 wires? when i did my rewire mine had 5 wires? will this make my gas gauge not work? here is the pick of the one i just bought

http://cgi.ebay.com/ebaymotors/WALBRO-HP-255-FUEL-PUMP-MITSUBISHI-ECLIPSE-95-99-2G-DSM_W0QQitemZ350211506794QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item518a3b826a&_trksid=p4506.c0.m245&_trkparms=65:2|39:1|240:1318#ht_1769wt_974

 

[95burgundyesi]

Follow this as a good direction. Visual Frequently Answered Questions - Home Page , go to the fuel and then rewire 2g fwd link.

The only difference was on ym plug being a awd and this is for a fwd, my plug had 4 wires, maybe 5. A ground,power, and two yellow stripped wires for the Low gas light and the other yellow for the gauge in the dash.

Those two wires do not get touched, just the ground and power wires. If there is a third wire I am not remembering leave it alone. Just worry about the all black wire(ground) and blue and black(power).