420A Valve Cover Thread! BLING BLING!

[InfiniteGSX]

I'm trying to locate all the valve covers that will bolt up to our motors. If there are any I have missed let me know...

Dodge Avenger/Mitsubishi Eclipse/Eagle Talon 420A (OEM to us)
Dodge Neon 420A (Same shape as Stock except it does not say 2.0L 16V DOHC)
Dodge Stratus/PT Cruiser (2.4L 16V DOHC, Similar Shape as the SRT-4)
Dodge Neon SRT-4 (2.4L 16V DOHC Turbo)

So far all of those fit our 420A Motors. The only reason I dont want to use the SRT-4 Valve Cover is because it says 2.4L and not 2.0L. So what I was hopeing I could find was a Valve Cover in the same shape as the SRT-4... but without the letters and numbers so I can make my own...

Makes me wonder if we could use an SRT-4 block... ehh ehh? ha ha!

 

[bling5tatus]

so modify an srt4 cover, shouldn't be too hard with a dremel or a die grinder.

 

[XMasta19]

Why?

 

[Blitzeclips]

grab a sharpie and write "2.4L bi*** car". That should work. But I'm probably wrong, as all if not most my information is.

 

[bling5tatus]

if he doesn't want the 2.4L on there, but it will fit his car, grind the letters off.

 

[XMasta19]

Not sure if you've seen corbins valve cover or mikes new one, but just about anything can be done with those things. FYI: they're both on 2gnt for those who are able to log in over there...

 

[vbgmcpu]

I feel weird for replying to this thread after 17 years but if anybody in 2024 (or any time ) is planning to use a 2.4l turbo valve cover DON'T! I already made the mistake of buying one just so you don't have to do it. It WON'T fit, if you're looking for a similar style go for an N/A, *NON TURBO!!* Stratus 2.4L valve cover.


For reference, the one you should get looks like this:

You must be logged in to view this image or video.

 

[Vaermxna]

I feel weird for replying to this thread after 17 years but if anybody in 2024 (or any time ) is planning to use a 2.4l turbo valve cover DON'T! I already made the mistake of buying one just so you don't have to do it. It WON'T fit, if you're looking for a similar style go for an N/A, *NON TURBO!!* Stratus 2.4L valve cover.


For reference, the one you should get looks like this:

You must be logged in to view this image or video.

if i may ask what about the turbo vc doesnt fit? is it by any chance that 9th bolt hole on the right middle side? did you have any other problems with it?