ECMlink USER DEFINED settings for MAP

[miliman13]

Hey all i have seen a few threads about user defined settings, for MAP sensor and they all seem to have the options for you to defined/ calibrate your sensor, just like we all do for the WIDEBAND.

However i do not see any options at all to select my min/max raw values like others have shown they can...
any guidance ? I realize ECMLink allows us to calibrate our sensors - which is great but i dont see how !?

You must be logged in to view this image or video.

Its blank for me .

You must be logged in to view this image or video.

compared to this thread

You must be logged in to view this image or video.

ECMlink - Omni 5 bar MAP sensor ECMLink settings needed

Just bought a Omni 5 bar to replace my 4 bar that I’ve had for years. Wanted to run more boost :) so. What settings would I input. On ecmlinkYou must be registered to see element.You must be registered to see element.

www.dsmtuners.com

 

[llxkevinxll]

Can you show a screenshot of what you see? Is one of those above your screen?

Are you on the latest version of the ECMLink software?

 

[miliman13]

Can you show a screenshot of what you see? Is one of those above your screen?

Are you on the latest version of the ECMLink software?

Yes the first two images are my screenshots

I do have the latest firmware from ECMLink

And the 3rd image is what I’m comparing with , I do not seem to have those options
The linear boost above Air pressure .

 

[llxkevinxll]

Yes the first two images are my screenshots

I do have the latest firmware from ECMLink

And the 3rd image is what I’m comparing with , I do not seem to have those options
The linear boost above Air pressure .

I assume you are attempting to get a 5-bar Omni MAP working. And the thread you linked includes the two settings you need to enter to make that MAP sensor work. It has been a little bit since I have used ECMLink but I am under the impression that LinearBoost portion isn't necessary here. That is the graphing portion of the software, not running the car. Have you tried settings from that thread you linked?