2G Turbo Oil feed on 2.4l

[Riceburning101]

So quick question normally the turbo is feed coolant from the block with a banjo bolt and metal hose on the 2.0l now my 2.4l have a plug there but its way to big for the 2.0l coolant feed line for the turbo. so what are the options for turbo coolant lines. I searched but it was very vague. oh yea if you didnt notice its a dohc swap on a 2.4l block if that helps

 

[viperlp01]

There is a reducing fitting that normally goes in that huge hole...

 

[Riceburning101]

so i am missing that

 

[viperlp01]

Exactly. It should be in your 2.0L block still

 

[ed1380]

Not your exact question, but I'd recommend deleting the coolant lines to the turbo. It makes for a much cleaner install.

 

[Riceburning101]

sorry never really noticed the reducer on the block but yea i am going to just cap off the lines since when i tried to get the reducer out it snapped off on the old 2.0 block and i have an extra one and it snapped off too. so that is my sign just to delete the lines. I didnt know you really could do that but after research really no reason to keep them. Thanks for the help guys

 

[miguelmcv]

Or you can use a 1g water pipe, the pipe has the water feed port to feed the turbo, but you need to use a 1g thermostat housing as well.