Trying to install B&M oil cooler

[EnvyMyGsx]

I have searched the fourms and anything I found wasn't useful. My question is on a 90 oil filter housing what is the thread size of the two ports that the an fitting would screw into, running from the oil cooler? I have heard 3/8 to -8 ive heard 16mm-1.5 to -8. Could anyone clear this up for me?

Also if anyone has a B&m oil cooler what are the thread sizes on that as well.

Jim

 

[forcefed4]

16mmx1.5 is the thread pitch for the OFH. What size lines are you going to run to the cooler? I just picked up -8 stuff.

Earl's Performance 9919EFJERL - Earl's Performance AN to Metric Adapter Fittings

I think the B&M coolers are 1/2 inch

Earl's Performance 981688ERL - Earl's Performance AN to NPT Adapter Fittings

 

[EnvyMyGsx]

16mmx1.5 is the thread pitch for the OFH. What size lines are you going to run to the cooler? I just picked up -8 stuff.

Earl's Performance 9919EFJERL - Earl's Performance AN to Metric Adapter Fittings

I think the B&M coolers are 1/2 inch

Earl's Performance 981688ERL - Earl's Performance AN to NPT Adapter Fittings

I'm running -8 lines. Thanks for the info and links.

Jim