tranny rebuild

[turboedspyder]

so 1st gear has been popping out alot and i realized ill ###### have to do a tranny rebuild. is this something i could do myself or should i take it to a shop? also what parts would i need?? thanks a lot

 

[MetalliHawk]

Tranny rebuild info HERE and HERE. Courtesy of VFAQ.com. You'll have to be very careful if you try to rebuild it yourself, need a few special tools, and mark everything clearly. If you decided to have it rebuilt professionally I'd skip local shops and send it to shep, TRE, or Jack's.

 

[Redfwdsm]

so 1st gear has been popping out alot and i realized ill ###### have to do a tranny rebuild. is this something i could do myself or should i take it to a shop? also what parts would i need?? thanks a lot

dude call Chris or Alex at dogbox they have amazing tranny rebuilds for a good price there in jersey not to far from you 732 363 2227-shop line 724 322 4982-Chris the shop managers cell they will take care of you i have a trany from them and let me tell you it is amazing better than shep and alot cheaper

 

[nfernotalon]

If you dont feel brave enough to do it yourself I suggest you check out dogboxracing.com, my tranny just started doing the same thing too.

I gave these guys a call and they were very friendly and answered every question I asked them, this is where my tranny is going to get rebuilt, and the price is awesome!

 

[nfernotalon]

dude call Chris or Alex at dogbox they have amazing tranny rebuilds for a good price there in jersey not to far from you 732 363 2227-shop line 724 322 4982-Chris the shop managers cell they will take care of you i have a trany from them and let me tell you it is amazing better than shep and alot cheaper

Damn beat me

 

[Redfwdsm]

Tranny rebuild info HERE and HERE. Courtesy of VFAQ.com. You'll have to be very careful if you try to rebuild it yourself, need a few special tools, and mark everything clearly. If you decided to have it rebuilt professionally I'd skip local shops and send it to shep, TRE, or Jack's.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/4d3S9grMI_o&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/4d3S9grMI_o&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
this is there shop car at dogbox they do not #### around there

 

[Redfwdsm]

If you dont feel brave enough to do it yourself I suggest you check out dogboxracing.com, my tranny just started doing the same thing too.

I gave these guys a call and they were very friendly and answered every question I asked them, this is where my tranny is going to get rebuilt, and the price is awesome!

good choice dude i hang out at the shop sometimes just to be around the cars when mine is down and they couldnt be more friendly.
now this dosnt mean everyone go hang out there they are not a hang out i just lurk there

 

[nfernotalon]

good choice dude i hang out at the shop sometimes just to be around the cars when mine is down and they couldnt be more friendly.
now this dosnt mean everyone go hang out there they are not a hang out i just lurk there

I wish I could go hangout there I dont think the talon would make it, maybe in a flatbed

 

[->PrOjEcTGS<-]

Tranny rebuild info HERE and HERE. Courtesy of VFAQ.com. You'll have to be very careful if you try to rebuild it yourself, need a few special tools, and mark everything clearly. If you decided to have it rebuilt professionally I'd skip local shops and send it to shep, TRE, or Jack's.

The only special tools needed are a shop press and a good pair of snap ring pliers. Other than that, follow the VFAQ and you can get it rebuilt by yourself

 

[nfernotalon]

The only special tools needed are a shop press and a good pair of snap ring pliers. Other than that, follow the VFAQ and you can get it rebuilt by yourself

Ahh yes but these guys guarantee the rebuild good for 10,000rpm and he told me 600hp

Might as well...

 

[->PrOjEcTGS<-]

True... I just like doing things myself though and encourage others to learn and conquer their troubles aswell.

 

[turboedspyder]

ill give them a call tomorrow and talk to them about it. it sounds like they know what theyre doing and i dont know if im ready to mess with the tranny myself yet. how much did they tell you it would cost??? just curious