The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2G Ticking noise

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Daniel4774

Probationary Member
4
0
Sep 7, 2014
Tucson, Arizona
I got my '99 eclipse (RS) as a project as it didn't run when I got it. I got a new battery and changed the oil, gas, and gaskets for the valve cover and oil pan. I started the engine and there was a loud knock. I replaced all of the rod bearings. I changed the oil again with some oil treatment to flush out potential gunk. I started the motor once again and the knock was replaced by a much milder ticking. Some have suggested that the fuel injectors can be making the noise, but I am not sure how to fix this. Note that I am on a tight budget and cannot afford anything major.
 
Yes the noise could be lifters. If they are sick, get EVO3 lifters if possible. They seem to be a longer lasting proposition.
Cheers
Ross
 
You can use a long wood handled screwdriver to do a sort of diagnostic by sound. Hold the wooden end up to your ear and place the tip on the injectors or at various spots on the valve cover. The wooden handle should amplify the sound when you get to the thing making the ticking. I have located many things from defective water pumps to loose lifters this way.
 
lifter tick is a common problem with DSM's, I bought my 3g revised lifters from partsdinosaur for a pretty good price
 
Ok thanks. I read that the lifters from the 2.4 PT Cruiser will work. Is this true, and if so are they cheaper than 420a specific ones?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top