Throttle Body Rebuild Kit

[Drakart1z]

Have you gotten some stock in yet?

 

[snowborder714]

Have you gotten some stock in yet?

I have not had the time to locate another supplier.

 

[pokeytsi]

Do you still have the tool available?

 

[snowborder714]

Do you still have the tool available?

I just started 3D printing the tools and sent one out to a guy as a test. Let me reach out and see if he's used it and had any issues. I probably won't be able to get back to you until early next week as I'm busy this weekend.

 

[cyclops755]

Extremely interested in buying kits and tools from you if you can get things back in stock!!

 

[faqinshiet]

I would be interested too

 

[99eclipsegs-2t]

I'm interested in a tool for the seal install when they become available, thanks in advance!

 

[1990TSIAWDTALON]

I would like an install tool also, if the 3d printed design worked out good. I have one for installing valve stem seals and love it. Thanks for all you do Brian!

 

[lunaTuna]

@snowborder714 do you have any 2g mil spec kits for sale? need 1-3 of them if you do and also would love to buy the install tool.

 

[snowborder714]

@snowborder714 do you have any 2g mil spec kits for sale? need 1-3 of them if you do and also would love to buy the install tool.

I don't have kits at the moment. The mil.spec shaft seals are still out there for sale through some vendors. And I have a couple of test 3D printed install tools out for review that I hope to hear back from one of the guys soon to make sure it works before I sell more.

STM Throttle Body Shaft Seals for DSM/Evo/3S

When these seals wear out, they can cause leaks, sticking, and jamming of the throttle plate. We tested a car with leaky seals and once replaced, we gained 20 HP and 20 TQ! Don't risk a boost leak like that, replace your old seals!

stmtuned.com

Throttle Body Shaft Seals (Heavy Duty): Mitsubishi Eclipse 91-99

Do you have a turbo DSM with a leaky or sticking throttle plate? Are you hearing a large amount of air rushing through the throttle body when you use our leak tester? You may have worn-out throttle shaft seals. The seals keep the throttle plate shaft centered and positioned in the throttle body...

www.extremepsi.com

 

[snowborder714]

Do you still have the tool available?

Extremely interested in buying kits and tools from you if you can get things back in stock!!

I would be interested too

I'm interested in a tool for the seal install when they become available, thanks in advance!

@snowborder714 do you have any 2g mil spec kits for sale? need 1-3 of them if you do and also would love to buy the install tool.

Install tools are now available!

3D Printed Throttle Body Shaft Seal Install Tool

This throttle body shaft seal install tool is key for installing the seals straight. Any misalignment can cause damage to the seal, especially any metal cased/mil.spec seals.3D printed out of ASA$15 shipped in the lower 48 states. Anyone outside...

www.dsmtuners.com

 

[lunaTuna]

I don't have kits at the moment. The mil.spec shaft seals are still out there for sale through some vendors. And I have a couple of test 3D printed install tools out for review that I hope to hear back from one of the guys soon to make sure it works before I sell more.

STM Throttle Body Shaft Seals for DSM/Evo/3S

When these seals wear out, they can cause leaks, sticking, and jamming of the throttle plate. We tested a car with leaky seals and once replaced, we gained 20 HP and 20 TQ! Don't risk a boost leak like that, replace your old seals!

stmtuned.com

Throttle Body Shaft Seals (Heavy Duty): Mitsubishi Eclipse 91-99

Do you have a turbo DSM with a leaky or sticking throttle plate? Are you hearing a large amount of air rushing through the throttle body when you use our leak tester? You may have worn-out throttle shaft seals. The seals keep the throttle plate shaft centered and positioned in the throttle body...

www.extremepsi.com

well.. if you end up wanting to sale one of the 3d printed shaft tools i have about 4 throttle bodys im rebuilding and would love to give a great review, just installed a set of seals and boost leak tested and its still leaks so, im in need of a tool the old using a socket just wasnt cutting it. for me

 

[1990TSIAWDTALON]

The tool works GREAT! I installed regular TB seals by hand with his tool. On MilSpec seals, I had to tap on the end of the tool with a hammer. The tool held up great on those also, with a perfect flat fit in the TB shaft bore.

You must be logged in to view this image or video.