sticking waste gate

[slowdsm1]

my problem is that when i go wot about to the top of 3 gear my internal waste gate sticks open and my boost falls off then i have to get out and tap the wast gate arm to get it to go back down

anyone ever have this problem

oh i have the slowboy racing 20g ported,with the 38mm flapper i am only running 15psi of boost but it creeps to 20

any help would be nice

 

[beat90tsi]

My E316g WG actuator was sticking a while ago. Just check it out, take it apart, lube it up if necessary. Mine was fine, and just starting jacking up. I think the heat just warps it a bit, and it starts catching on the housing or something else near it.

Good luck