The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Rix Racing

sticking waste gate

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

slowdsm1

Probationary Member
22
0
May 19, 2004
iowa city, Iowa
my problem is that when i go wot about to the top of 3 gear my internal waste gate sticks open and my boost falls off then i have to get out and tap the wast gate arm to get it to go back down

anyone ever have this problem

oh i have the slowboy racing 20g ported,with the 38mm flapper i am only running 15psi of boost but it creeps to 20

any help would be nice
 
My E316g WG actuator was sticking a while ago. Just check it out, take it apart, lube it up if necessary. Mine was fine, and just starting jacking up. I think the heat just warps it a bit, and it starts catching on the housing or something else near it.

Good luck
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top