splitting the big end of an eagle rod

[fltblkteg]

looking for a tip on the best and safest way to split the large bearing end of an eagle rod, and please don't tell me to hit it with a hammer ....thanks

 

[UNDER_PRESSURE]

How about getting a spring compressor and working it backwards or taking it to a machine shop.

 

[herostar]

You can put the smaller end or middle in a vise and use vise grips to pull it off, be sure to pull straight up and maybe wiggle it a little.

 

[Black94DSM]

Hit it with a rubber hammer. Sorry but thats the best way to do it without putting marks on it and possibley hurting it.

 

[fltblkteg]

thanks guys, i bought a proform rod splitter from summit it's 2.20 o.d. and the rods are alot smaller than that so I guess i'll try the rubber mallet