The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

some easy questions i hope

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Grimis

20+ Year Contributor
1,096
12
Sep 5, 2003
Jersey Shore, Pennsylvania
Ok,

got my car back, and well, its a mess. My tarp that was coving the car, did its job... mostly, a 40lb block of ice was made, from the hatch window being out and using the spoiler as the other end, made a bowl kinda, and it sunk in, and with it doing that, it leaked, and well my hatch is now a ice rink :notgood:

but im chiping away at it , got about 3inch's deep, I know im going to need to replace the wiper sprayer motor/tank probley.. not sure. And under the passager seat is another rink..

Any ways, after all the work i did today, i deside to open up the glove box, and low and behold, a mouse has built a nest :tease: ....:notgood: :cry: out of the pile of what looks like to be seat particals, or something esle from the car, (found no wire casings or any thing like that) passager seat is ok, driver seat is still in the car, ran out of sunlight and warm temps (was 36F here today)

I poped the hood and found another nest on top of my valve cover, but all wires are intact.

Any ways, What should i look for and where in the glove box area to make sure no wires was chewed.

2nd could i use jumper cables to my battery terminals ( i have no battery ) and like turn the key to acc and check the heater core/fans, lights and move my driver seat so i can get to the bolts??

engine is almost ready to be pulled when the distruction happend, so im like ugggg on the clean up.

sorry for jumping around, im a bit worried but not realy.. and need someone/or others to yak at :thumb:
 
Hmmm, interesting question about using jumper cables on the battery cables without a battery to power accessories. It seems like you would have current running through the car's electrical system so it would work, but I can't say for sure. But you've got my curiosity up now.
 
Yeah, im kinda wondering if it can be done, i dont want to fry any thing, thats my only consern, i could just go buy a battery but it would be dead before i get the motor rebuilt.
 
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top