SoCAL DYNO MEET AUG 21ST!!!

[Bigglesworth87]

I think i might be in..... Dan, can I roll with the crew? I dont have too many go fast parts. Oh well, I guess I can figure out where I am at now.

 

[DSMSpyder99]

FO SHO just roll up to my house and then we will go to the meeting point

 

[DSMjrv]

errg.... palmdale is a weird city, no street names... just avenue R and B and Q and 40th street through like 5th street.... weird

my car is at his shop right now cuz uh i murdered a piston or something... there should be a do not exceed 150mph sticker on eclipses... so everything is gonna get replaced so that baby runs like new...

if the dyno is ready by the time my car is fixed ill just get my car dyno'd while im out there... and then strap on my injectors for the dyno meet and get it tuned....

 

[Talesin]

I may have a guy in a Porsche 944 Turbo rolling over with me... he improperly installed his MBC and is boosting at just under 2 bar (27-29psi), wants to see how much he's laying down. (His kit said to adjust it for under 1.3 bar)

Heck, he keeps boosting like that, we might have a fireworks show to go along with everything else... and might have to make his car an honorary DSM, if the pistons or dipstick get any altitude. ^_^

 

[Bigglesworth87]

Are you actually going to be able to get through all these cars in one day? I'm contemplating on going because i live so far and don't want to drive there (especially on sunday-since i have to work Monday) and not be able to get my car done.

 

[Kinetic Boost]

Well I was able to get the day off so I will be attending. But what time is it goign to start? I think earlier the better if a lot of people are going to show up.

 

[Terrorize]

----------------------okay okay okay all---time shift starts at 9am 2more hrs-----------------

also im not worried i have 2 dynos, so i can do 2 fwd or rwd cars at once and 1 awd car at a time, things should go pretty fast cuz i hired 2 guys as tire busters for the day, so we should avg at least 4-5 cars an hr, so if we start at 9 go to 1 thats like 16-20 cars, take a 20-30 min break, an back to mwork- so 1:30 to 630 and we have another 20-25 cars, take another 20 min break, go from 7-9 and thats lets say 8 more cars, thats a total of 43-51 cars, and im expecting only about 40-50 cars so we should be fine

 

[shpyder]

First post on here, and ready to get yelled at for something or the other.

What's the zip code for the meet, and the cost per run?

Thanks!

 

[eclipsegsx1736]

First post on here, and ready to get yelled at for something or the other.

What's the zip code for the meet, and the cost per run?

Thanks!

ITS ON THE FIRST PAGE!!!! WHATS WRONG WITH YOU!?! .... j/k. You said youd get yelled at for something so there u go. BTW your car looks awesome from that little sig pic.

 

[DSMjrv]

agreed.... ur car looks sick as fvck! lets see some better pics...

 

[CPHunter]

damn it i thought i was the sexest eclipse ,there goes my award

 

[Bigglesworth87]

damn it i thought i was the sexest eclipse ,there goes my award

Who the hell gave you that award?? I think you read it wrong, its "Riceiest EEEKLIPS"

 

[shpyder]

agreed.... ur car looks sick as fvck! lets see some better pics...

Thanks! I just posted them on here when someone asked me to:

http://dsmtuners.com/forums/showthread.php?t=193722&page=2

So, about this dyno... anyone know the cost per run and zip code? Or at least the driving distance from Escondido CA?

 

[gsjoeygst]

i want to go. but i dont think i can make it cause im not done with the other mods i need to put in my car.

 

[CPHunter]

i want to go. but i dont think i can make it cause im not done with the other mods i need to put in my car.

i am going but without my Car,might go with Dan,i don't have 650 yet nor a fuel pump,just a big @ss turbo,and about my Award....it was Sexy So Cal Clips,well i guess ima stop that award so it stays with me! All Mine!

 

[eclipsegsx1736]

Thanks! I just posted them on here when someone asked me to:

http://dsmtuners.com/forums/showthread.php?t=193722&page=2

So, about this dyno... anyone know the cost per run and zip code? Or at least the driving distance from Escondido CA?

Its STILL one the first page... ok ok ill copy and paste it here:

hey guys just bought an AWD dyno, gonna have a meet, on the 21st of AUGUST
(for those who get lost my cell # is 661 406 8931)

address 37824 5th st east(suite h), palmdale ca 93550

directions are as follows:
1)from sfv,l.a, O.c.- take the 5 north to the 14 north
take the 14 all the way to avenue S,
get off on S and go right
go left on 5th street east(its the first left)
take 5th st down about 1/2 mile and were on the right side all the way at the end(there is only 1 industrial park on this street so it isnt hard to find

2) from ventura-take the 126 to santa clarita, get on the 14north,
take the 14 north to ave S,and go right
go left on 5th street east(its the first left)
take 5th st down about 1/2 mile and were on the right side all the way at the end(there is only 1 industrial park on this street so it isnt hard to find

from the 909/951/riverside area-- take the 15north, get off on pearblossom hwy(138)/hwy 2 exit. take the 138 all the way into palmdale, its about 1hr drive- take pearblossom hwy to sierra hwy and go right
take sierra hwy to AVE S and go left on S
take the first right which is 5th street east(past train tracks)
take 5th st down about 1/2 mile and were on the right side all the way at the end(there is only 1 industrial park on this street so it isnt hard to find

well i forgot to post up prices-
AWD- 3 pulls w/ w/b-70, w/o w/b 60
FWd/RWD-w/ w/b 50, w/o w/b -40

 

[shpyder]

gosh, i dont feel like the sharpest knife in the drawer!

 

[Artinist]

ok, i don't think I saw this asked before. what kind of dyno is it?

 

[Terrorize]

i have a dynapack 5032 series awd dyno

 

[SilverMitsu]

nice photoshop there beau....

 

[eclipsegsx1736]

nice photoshop there beau....

You mean the CF hood? Its real . I got it in a trade.
BTW Rob, who took that really nice pic in your sig?

 

[DSMSpyder99]

ohhh shit BURN! Yea it is real rob, I'm the one that set up the deal (you owe me beau ya damn ricer ). It was orginallys Mike's aka Bigglesworth

 

[eclipsegsx1736]

(you owe me beau ya damn ricer ). It was orginallys Mike's aka Bigglesworth

...

 

[spcebrd]

Im there I just gotta decide which to dyno my 1g or evo

 

[PSIcho]

Terrorize, how will you attach the Wideband? Do we need to have a pre-existing bung available or do you have some tail pipe contraption available?