s-afc2 install wtf is wrong

[dsmracer69]

Ok i got a quick question.... I instaled my s-afc 2 unto my 97 gs-t and everything works except the throttle isn't being detected. It is hooked up rite and the afc is good because i checked un my 1st gen. The throttle wire i hooked it up to was ecu pinout 84 tps is this correct and if so does anyone have any ideas why this wouldn't work. Thans alot Joe.

 

[hellotbone]

Are you getting no tps signal or incorrect signal? U know if the arrow is pointing down u get no tps display right? If you getting just incorrect readings compared to you logger or something the AFC has to learn your throttle position but Im pretty sure you already know what.

 

[Blk_99gst]

Yes pin 84 is the tps. Are you sure you tapped the right one on the connector; it can get confusing sometimes on which was to look at the connector, etc. Did you set the safc menu's up after the install, the up arrow like hellotbone said? Other than that, it should just work.

 

[dsmracer69]

did all of that the arrow is up and its is conected to pinout on the ecu 84 tps.