[RESOLVED] clutch pedal height problem with act 2600 clutch kit act streetlight flywh

[my4ATEurV8]

i have a 1995 talon tsi awd 5 speed
i just finished instaling my team rip trany, act 2600 clitch pressure plate and act flywheel.
i also got the longer rod for my clutch slave cilinder that i got from slowboy racing.
i thoroughly bleed the clutch hydrolic system as well. and i still feel the pedal engage real close to the floor.
how can i get the clutch pedel to engage higher off the floor?

 

[DeNoZZo]

There is a bar rod coming out from your slave cylinder under the dash to the left of the clutch (right out of the firewall). You need to loosen the nut on the backside of the bracket, and in your case turn the rod clockwise.

 

[Defiant]

RRE's Clutch And Flywheel Tech Info

 

[44pirate]

There is a bar rod coming out from your slave cylinder under the dash to the left of the clutch (right out of the firewall). You need to loosen the nut on the backside of the bracket, and in your case turn the rod clockwise.

Slave cylinder is on the tranny. Master cylinder is at the dash.

 

[my4ATEurV8]

thanks guys, that worked great, and easy adjusting too