relocating the MAF

[UW95GST]

I picked up the GM MAF and translator, and I'm not quite sure how I can relocate the MAF so I can vent to the atmosphere. I ran a few searches but couldn't find anything helpful?

 

[KPWSerpiente]

www.dejontool.com makes special upper intercooler piping to mount the gm maf after the bov and before the throttlebody. Or you can custom make your own piping to do the same thing.

-T

 

[FourG63 97GST]

MAF goes between TB and BOV to vent correctly

 

[UW95GST]

Originally posted by KPWSerpiente
www.dejontool.com makes special upper intercooler piping to mount the gm maf after the bov and before the throttlebody. Or you can custom make your own piping to do the same thing.

-T

You must be logged in to view this image or video.

that's what we're talking about right? i've already got the greddy upper ic piping, will that be a problem

 

[UW95GST]

I was looking at my piping, the GM maf is pretty small...could I just connect both sides of the GM maf to the existing piping with some couplers?

 

[L2RTSiAWD]

Yes if you cut your pipe you can insert the MAF in there.

 

[UW95GST]

Originally posted by L2RTSiAWD
Yes if you cut your pipe you can insert the MAF in there.

Where is that exactly? any diagrams or pics?

 

[L2RTSiAWD]

You can use the dejon pipe above as reference but somewhere in the middle between your BOV and Throttle Body.

 

[UW95GST]

Originally posted by L2RTSiAWD
You can use the dejon pipe above as reference but somewhere in the middle between your BOV and Throttle Body.

That pipes connects to the throttle body right?

I'll be sure to take pics, maybe a write up too

 

[L2RTSiAWD]

Yes the upper portion after the cut connects to the TB.

 

[evanspears1]

So the other end of the pipe will connect to the top of the intercooler.... where it goes