Putting a datalogger cable in a car (help)

[Oreopride18]

Well, I was going to log my car tonight and get a decent tune off of it then something happened:

http://www.pptracing.com/framedpages/datalogger_installation.htm

That's the site I would have used to hook it up. I'm sure someone here knows what wire goes to which prong.

This is the cable I have:
http://www.dsmparts.com/data_logger_1g.htm#

And these are the colors I have to work with:

Black, Red, Blue, and white -

I know the red hooks into a free fuse location but I just need to match the other 3 up to the prongs.

 

[dynatos]

Check these out. Though cable says is was all made up, but my guess is red is 12+, black is pin 12 at the connector (ground). Blue and white would be for pin 1 and for pin 10, but i'm not sure which. I would guess that blue would be for data. But hopefully this will point you in the right direction.

http://mmcd.meditprofi.ru/

http://co.dsm.org/tech/1G_dl_sch.html