Punishment Racing questions

[KlowdDragon]

Hey Punishment, I was just wondering how big the piping is on your intake hard pipe, and I was wondering if you were going to ever post some numbers for your products, id like to see some numbers on the header, the header/downpipe combo, the translator, the hard pipe, and your intake package.

 

[na90dsm]

there header says its for use with a turbo downpipe, which leads me to beleive you can bolt a 2.5 inch turbo exhaust to that as the gst and n/t have the same body/drivetrain playout.

either way im going with punishment headers just for that

 

[Thunderskull]

Yeah, my header and translator are arriving tomorrow. I'll post pics and seat of the pants results. I'll be going to the dyno later on this month.

 

[na90dsm]

i saw your pics and im jelous. but i have one question

if it uses a 1g turbo fwd downpipe why did you get a press bent oen form punishment rather then a mandrel one form oh say rnr.

not knocking punishment but mandrel i think woulda made a better and bigger difference. let us know hwo it turns out and what kinda power she makes.

 

[Thunderskull]

It just kept the cost down. I'll let everybody know on Monday how it turns out since I'm doing the install this Sunday.

 

[TSIMonsteR]

will the stock MAF fit to the Punishment intake, or will i just have to stick the sensor inside the filter ?

 

[na90dsm]

id go all out and use a 3 inch custom intake pipe thats the same setup as the injen intake. i would just use a injen but its to small. use a 3 inch custom, mass airflow

 

[Defiant]

You'll probably have the best response by sending an email like this to Punishment.

When you do, tell us what they say.

Until then, closed.