Outflowing 2G maf?

[DSM Chase]

I have a bullseye s259 Batmowheel, Im pretty shure im outflowing my 2G maf im getting like 2700 hz at 25psi, But anyways my question is does a Galant 95-2003 MAF flow more than the 2G? Because i have a galant maf... Anyways if i were to put this in my car would i just select evo 3 maf on dsmlink?

 

[92AWDHX40]

Just pick the maf you have, on dsmlink.

 

[DSM Chase]

Thats not my question... And there is only 3 Options for maf type on dsmlink: Stock,EVO 3, and speed density..

 

[daren_p]

Look at the MAF data in link during a pull. It should be a fairly straight line that increases as the rpm go up. If your getting spikes & dips in the line, at the higher hz readings, then your starting to overrun your MAF. Mine personally starting going screwy around 2800-2900hz.

You can either install the Evo MAF, which is good for abit more airflow or just use the fake MAF option (which is what I did). There's information on how to set it up properly on the link wiki. With this enabled, you can run any kind of airflow you want through the stock MAF. I was seeing 3300hz or so & it ran great. Others have pushed the stock MAF much futther. I will now be switching to speed density.

 

[agentorange313]

Do you have a pic of the galant MAS? what are the numbers on top of the MAS? Part number?

 

[DSM Chase]

its E5T08171

 

[agentorange313]

its E5T08171

The number on top is 501 most likely.

http://www.dsmtuners.com/forums/newbie-forum/397265-evo-8-mass-my-1g.html#post152521154

It does not seem to be an upgrade to the 2gmas.

 

[DSM Chase]

thanks