oil drain clearance

[1FSTTEALTLN]

ok, so i've been searching for a while and i now feel like i'm the only person with this problem. i have a bullseye performance 60-1 w/ the stainless exhaust housing and an evo III mainfold. my question is, has anyone else had a problem with draintube kits clearing the front motor mount? i have tried stainless and pushlock, but i keep ending up with a kinked drain tube. any help would be awesome, will post pics of install if needed.

 

[donniekak]

You must be logged in to view this image or video.

 

[1FSTTEALTLN]

i"ve done that already. i took a 1/4 inch off one side. i think i'm gonna take the mount out, cut it apart and reweld/reshape it, but i just want to see what other people have done.

 

[donniekak]

i"ve done that already. i took a 1/4 inch off one side. i think i'm gonna take the mount out, cut it apart and reweld/reshape it, but i just want to see what other people have done.

I've taken a huge u out of the driver side of my motor mount bracket, and have been able to get a drain on tons of different turbo's.

 

[1FSTTEALTLN]

i"m gonna snap some before photos tomorrow and then i'll post. after that i'm gonna redesign this thing and if it's good i'll post specs. anyone else with pics of this mount all ground up, feel free to post.