New to tuning want some peoples advice on this log.

[1gtalonlove]

Hello i am looking for some advice in this log, its two 3rd gear pulls its pretty long. Sorry about that haven't learned how to make them shorter yet.

 

[Diamond Star Werks]

Have you installed any aftermarket sensors? MAP sensor, wideband, etc.? Did you ever go WOT? The highest throttle position I seen was 83%. If you had your foot to the floor you throttle cable needs to be adjusted. It's on the rich side @ idle. I'd suggest dropping the MAFCOMP global scalar to -4.7. Also extending your closed loop operation would help as well as right around 38% throttle and -.5psi boost and up it's in open loop operation. Do you have a boost gauge? Your estimated boost peak was 17 psi. Timing curve isn't right either. With the load it's under its running on the lower side of the curve. The plots its running through need to be raised. It would be good to be able to log a/f ratio as well if have or can get a wideband.