need help w/2-step wiring

[missouri_dsm]

can anyone tell me how to wire the 2-step feature on the msd-2 ignition to a relay?

 

[eclipsegsx1736]

You wire it to a switch, not a relay. It's the blue wire coming from the box. Extend the wire if needed, connect it to one pole of a switch (a simple radioshack flip switch will do the trick) and then run another wire from a ground anywhere on the chassis to the other pole on the switch. When you throw the switch, the blue wire is grounded and the 2 step is activated. You can also use the existing switches on the clutch pedal, or place your own momentary switch (only activated as long as it's held) near the clutch pedal assembly, so pressing in the clutch activates it.