Need help on spending $150

[TheRealist]

I Have a injen Intake IS series, Tubular Manifold, and a Greddy EVO Exuast 3 Inch, Im wondering what i should get, i was leaning tords a manual Boost controller, but considering i do have a t25 can i boost no more than 14 psi? will a MBC give me any gains that i will feel and would i need a gauge boosting no more than 15psi tops??

 

[MCDGexx]

Send it to me

If you are going to TOUCH a boost controller you MUST get a gauge FIRST! You can get a decent gauge for 50-70 autometer. Or get a good gauge for about 100. I would get a JoeP MBC, autometer boost gauge, and go to a local muffler shop and see how much it would be to do a 3inch downpipe w/ high-flow cat.

 

[SinaiTSi]

I would definitely get a boost gauge next, especially before a mbc. Which, getting those two together, should run you around $150, which I think would be a good idea. The only thing is that you're really not gonna want to turn the boost up much higher for the time being due to stock fuel system and leaky bov, but having the mbc would be a good idea for future modding.

You beat me to it MCDGexx, good info though, basically what i was saying minus the exhaust part (which is also a good idea)