My new brake setup

[RoasT BeeF]

92-94 dual piston front calipers, SS lines all the way around, cross drilled front rotors. I have had all these parts on the car for about 2 years. It was time for new pads and all so I turned the rotors and made it look all perdy again.

 

[Flash]

Nice and clean!
Now when can I expect to see a picture of the wheels on the whole car?

 

[RoasT BeeF]

Soon as you pay the $400 you owe me so I can buy some tires.

 

[Sk8er07999]

Looks nice man How do those rims fit?

 

[ginsu417]

Nice. Here's my road racing setup (just waiting for the wheel spacers so I can install).

3000GT VR4 GEN-2 Rotors and Calipers

4-piston caliper, with 12.5" rotor - and an inch on each side to spare. The calipers would have cleared my SSR GT1s without spacers if they were spaced 1/4" further out from the hub on 13" rotors. I knew I should have gone with the cobra R rotors. Oh well. Next time maybe.

 

[PieEyedPiper]

paint that caliper while its off

 

[GSX0TIC]

Nice and purty. Both of you.

 

[Flash]

Learn to hate the dust shield. It did more harm then good for me.

 

[talon94es]

Nice job Brent. Those ought to come in handy during those high speed runs!

 

[pj1racer182]

Those look nice! Sorry to get off topic but has anyone seen that white 1st gen GSX driving around with Willwood 6 piston fronts on it??? It looks sick!

 

[Defiant]

Clean and flat-black those wheelwells while you're in there.

 

[MaNGiNa24]

92-94 dual piston front calipers, SS lines all the way around, cross drilled front rotors. I have had all these parts on the car for about 2 years. It was time for new pads and all so I turned the rotors and made it look all perdy again.

Is it just me or did you install that brake pad backwards in that first picture?

Looks real clean.