nkosi
15+ Year Contributor
- 320
- 3
- May 17, 2004
-
montreal,
QC, Canada
Hey guys i have two questions ...first one is the third red wire in the DIS-2HO input there are the two red wires mentioned in the instructions ...but there is a third red wire in the MSD harness and would that wire also connect to the black wire with white strips the 12v input ...if not where does it go...the second question is about the tach adapter i have it with my MSD DIS-2 so i dont need to cut the white wire from the transistor and connect it to the msd tach output...this is a mod done with installations without the tach adaptor on 1g ...thanks guys any input and answers will be much appreciated ...
