Megasquirt question

[ckiser07]

Hey guys, been reading the forums non stop. Loads of things I have learned already but here is my story and my question. I just bought a 95 talon ESI that has a fresh, fully built 420a with a turbo. I can list all of the mods on it if needs be, but it is a forged bottom end. Now my question...The car is currently tuned with an SAFC2 because the guy I bought it from didn't realize the SAFC2 doesn't really do squat with the 420a. So, I bought a MS2 but I believe I may have bitten off more than I can chew right out of the gate . This is my first tuner/turbo car. Does anyone know of anyone in the central ohio region (or any ohio for that matter) that will install a MS2 and tune it for a price? Thanks alot in advance and if I did miss a post with the answer I apologize, because I have been searching it seems non stop . Thanks again

 

[LeeSD1]

If you need someone in your area you might get more help on msextra but its really not that hard to install once you know what your working with. If your doing a basic piggy back install with MS then you can follow the 420a Megasquirt install
If your going full standalone then theres a little more wiring to do.

 

[ckiser07]

Thanks alot Lee, I will read through that write up. My big thing is I just dont want to ruin it so I will have to do alot of research.

 

[LeeSD1]

If you know absolutely nothing about Megasquirt then start reading the manual MS Documentation Theres A lot of good information in there.