Manley Piston Inspection
Part # 605105c-4
Every thing seems to bee here.
4 Pistons
4 Ring sets
4 wrist pins
Bag of locks , feels like 8
The spec sheet
The weights were close out the box, and were off in the range on the front of the box. Box is listed 351g to 352g, I found 352g to 353g off by 1g.
352.4g 353.0g so .6g from high to low
The wrist pins were close also, three of them 92.1g and the fourth was 92.3g
Once the wrist pins were placed with the pistons I saw a weight of 444.5g to 445.0g
For drop in go, these are close enough, But I like to tighten up the weights a touch more.
Once done all 4 weighed in at 444.5g
Slight buffing on 3 of the pistons is all it took.
My spec sheet on the piston balance.
Part # 605105c-4
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Every thing seems to bee here.
4 Pistons
4 Ring sets
4 wrist pins
Bag of locks , feels like 8
You must be logged in to view this image or video.
You must be logged in to view this image or video.
The spec sheet
You must be logged in to view this image or video.
The weights were close out the box, and were off in the range on the front of the box. Box is listed 351g to 352g, I found 352g to 353g off by 1g.
352.4g 353.0g so .6g from high to low
The wrist pins were close also, three of them 92.1g and the fourth was 92.3g
Once the wrist pins were placed with the pistons I saw a weight of 444.5g to 445.0g
You must be logged in to view this image or video.
For drop in go, these are close enough, But I like to tighten up the weights a touch more.
Once done all 4 weighed in at 444.5g
Slight buffing on 3 of the pistons is all it took.
You must be logged in to view this image or video.
My spec sheet on the piston balance.
You must be logged in to view this image or video.
Last edited by a moderator: