MAFT will not idle running rich

[icekilla126]

So i just installed the MAFT kit from dejon tools. I set the base settings and keyed it up and the red light flashes 7 times. So i tried starting it and the car would not idle. The car was very rich i didnt need an a/f guage or loger to tell me that much. And no matter how much i turn the dile to lean it still runs very rich. And unplugging the transler while it running seems to have no effect on what is happening. PLEASE ONLY POST IF YOU HAVE WORKED WITH THIS SYSTEM BEFORE

 

[grail97]

double check your wiring and color codes..

 

[viperlp01]

Mine does the same thing and the only thing i can find is that the maf is bad. It might not say it in the red flashes but when that thing starts to fail the computer just dumps fuel in to make sure your not running lean. That is what i have gathered from doing a little research

 

[KelTsi90]

Have you set the dip switches?? And check for vacuum leaks. Mine does that when the bov leaks at idle...

 

[icekilla126]

car is fixed they gave me a bad mass air senser