J-pipe Question

[subie22]

I have a ebay front mount and right now some of my intercooler piping is going right above the exhaust manifold, does anyone now where i can get a jpipe meant for my setup, i am guessing i need one that goes down, so if any one has an idea let me know. My endtakes just come out the side of the intercooler, and i rele dont want to do any custom work just some minor fab work. So i dont melt couplers.

 

[Puscifer]

If it's the J-Pipe you need you can get one off extremepsi.com pretty cheap or if you have a 16g you can go ahead and get their 16g install kit which comes with one (about 150). Kind of confused with what you wrote, are you sure it's the J-Pipe that you need?

 

[subie22]

yea sry a little tipsy, but yea i pretty sure i need a j-pipe, the reason being i have some of my intercooler piping going over the exhaust manifold and its melting couplers, so i need to reroute the intercooler pipping i am gussing downwards.

But i dont want to mod my intercooler pipping to much.

 

[cruisintalonawd]

yeah its what he needs, as he said that piping is going over his exhaust manifold which doesn't help cooling of the air, just buy the one off ebay it works on the 14b and the 16g.

 

[subie22]

even if i have an ebay inertercooler, i just dont have the money to mod my intercooler piping


<<< 100 posts +

 

[cruisintalonawd]

you have to mod maybe three pipes. post a pic and I'll tell you more if needed

 

[LocknessMonster]

Without the j pipe your doing more harm than good going over the exhaust mani. If your melting cuplers i would get on this stat, wouldnt want one of them to catch fire. Like cruisintalonawd said really shouldnt be that much work.

 

[cruisintalonawd]

Or what I've seen is people will put heat wrap in the manifold then you dont have to do any fabing at all again

 

[subie22]

any links where i should get one from.

 

[cruisintalonawd]

which one

 

[subie22]

for the j-pipe, i dont want to spend much, and also dont want to do to much modding

 

[eagletalonjohn]

do you have some pics. send them to me at [email protected]. i just installed 2 of these on my friends cars. let me see pics and i will let you kno what went wrong.

 

[cruisintalonawd]

ebay for the wrap and the jpipe both no more then $80 shipped

 

[peypey's ride]

The J pipe that ETS offers is the best! I got it on my Evo3 16G and never had any clearence issues! Here is a pic of their kit with the J pipe and a few of it on my ride. Contact ETS to see what they sell just the J pipe for.

 

[cruisintalonawd]

damn thats nice how much

 

[subie22]

it is nice.
got to myspace, i have no idea where my pic is, MySpace.com - www.myspace.com/28061893 and request me.

 

[peypey's ride]

just the J pipe, IDK, you'd have to contact ETS - Custom Turbo Kits, Intercoolers, Exhaust and Performance Parts - Extreme Turbo Systems and ask them if they sell just the pipe.

 

[subie22]

this is a pita i just want a jpipe that will work, without any issues, and for the record, gzp did the handy work.

 

[jspec]

ETS (95-99) 2G DSM Eclipse/Talon 14b/16g J-Pipe

Its $89 from ETS! looks like a nice piece. I have a J-pipe on my evo3 but I cannot use my FP intake with it.

 

[cruisintalonawd]

ok add me back

 

[peypey's ride]

With this J pipe you can use the FP 4" intake

 

[cruisintalonawd]

the ebay one would too

 

[jspec]

With this J pipe you can use the FP 4" intake

My j pipe interfers with my FP intake. Does this one go at a different angle? I was just going to cut it off and reweld a pipe onto it. Or I may just buy this one.

 

[dsmsucks]

ebay sales j pipes for real cheap $52shipped I think!

 

[subie22]

well how would i connect my boost controller if it doesnt have a nipple.