Is this the same for the 420a?

[talon1616]

Is this the same procedure for the 420a engine. Im new at this and i want to install myself. should i follow these instructions for my 420a. thanks

http://www.dsmtuners.com/forums/articles-engine-fuel/265060-how-replace-lash-adjusters-lifters.html


if not can you send me a link to 420a lifter installation. thanks guys

 

[crazyboy81]

Pretty much yes. Under the valve cover its all the same stuff, just 180 flipped.

 

[talon1616]

Pretty much yes. Under the valve cover its all the same stuff, just 180 flipped.

what do you mean pretty much. whats different. and thanks for the help

 

[crazyboy81]

The only difference is 180 degrees. Our pulleys are on one side 4g63 are on the other. It's the same thing really. Just follow those directions.

 

[talon1616]

alright thanks man. ill tell you how it turned out

 

[crazyboy81]

Just be careful, if you feel like your using too much force on something then.. well chill out and reapply what your doing. I pulled rockers and lifters from a junked 420A without removing the timing belt. Just unbolted the towers and lifted the cams up. If we could do that without messing up the timing then that would work. But don't try it without knowing first.