razza
Probationary Member
- 19
- 1
- Feb 12, 2003
-
Christchurch,
New Zealand
Giday people,
I am new to this forum so I thought I might as well go ahead and introduce myself. I hope this is in the right section. My name is Ryan Gillespie and Im actually not from the States. I live in Christchurch, New Zealand and have a 1989 Galant VR4. I find these US boards contain some brilliant tech info and lots of good people to share advice and thats why Im over here.
My VR is currently off the road. I have a bit of info on it on my website which is @ www.webbase.co.nz/raz . It does need an update so dont hold it against me. The car is currently off the road while I update some of the parts. Basically my new setup will consist of:
800cc Sard/ND Injectors
-8 Fuel Lines
1.5litre Surge Tank feeding a Bosch Motorsport 600hp fuel pump
SX Fuel Filter
SX Fuel Pressure Regulator
Microtech LTX8S
AGP RS60T Turbo (At the end of the month)
SBR Cast Manifold
38mm Tial Wastegate
600mm x 300mm x 100mm Bar & Plate Intercooler (24x12x4 for you us boys)
2.5" Intercooler Piping
Non Turbo Galant Intake Manifold
Reground 264" Camshafts
Thats the majority of the parts. My previous best has been a 12.78 which I hope to improve on. Anyway if anyone wants to comment on my setup feel free. I look forward to talking to you all
Regards,
Ryan Gillespie
Christchurch, New Zealand
I am new to this forum so I thought I might as well go ahead and introduce myself. I hope this is in the right section. My name is Ryan Gillespie and Im actually not from the States. I live in Christchurch, New Zealand and have a 1989 Galant VR4. I find these US boards contain some brilliant tech info and lots of good people to share advice and thats why Im over here.
My VR is currently off the road. I have a bit of info on it on my website which is @ www.webbase.co.nz/raz . It does need an update so dont hold it against me. The car is currently off the road while I update some of the parts. Basically my new setup will consist of:
800cc Sard/ND Injectors
-8 Fuel Lines
1.5litre Surge Tank feeding a Bosch Motorsport 600hp fuel pump
SX Fuel Filter
SX Fuel Pressure Regulator
Microtech LTX8S
AGP RS60T Turbo (At the end of the month)
SBR Cast Manifold
38mm Tial Wastegate
600mm x 300mm x 100mm Bar & Plate Intercooler (24x12x4 for you us boys)
2.5" Intercooler Piping
Non Turbo Galant Intake Manifold
Reground 264" Camshafts
Thats the majority of the parts. My previous best has been a 12.78 which I hope to improve on. Anyway if anyone wants to comment on my setup feel free. I look forward to talking to you all
Regards,
Ryan Gillespie
Christchurch, New Zealand
