1G Interior fasteners for back hatch panel

[bab96a]

I’ve found fasteners I can use for the rest of the back hatch interior, but the far rear plastic panels (very back of the car) uses six small fasteners at the top that are tiny and have a little ball shape at the end. I haven’t been able to find any parts online or in auto parts stores that will fit. Anyone been successful or do you just leave those holes exposed?

You must be logged in to view this image or video.

 

[19Eclipse90]

Here’s an option to get some made if you have access to a 3D printer: 3D Parts Files

 

[bab96a]

I don’t right now, but I’ll certainly look into it. Thanks!

 

[pagosa dsm]

looking for the same clips. will let you know if I find something.

 

[pagosa dsm]

Could use a plastic rivet if someone has removed the white insert on the body for a size.

You must be logged in to view this image or video.

Remove the white insert in the body. The hole becomes 1/4hole in diameter. You can use any clip with a1/4 insert. I used the xmas tree Napa part# 665-2395.

 

[bab96a]

That’s really helpful. Would have never thought of that. Thanks!

Here’s an option to get some made if you have access to a 3D printer: 3D Parts Files

Hi, a while back you gave me a link to a file to 3D print the rear interior clips in a 1G. At the time I didn’t know anyone with a printer but now I do. When I follow the link now, I find other 3D printed parts but not that one. Do you still have access to that file?

 

[luv2rallye]

Maybe here: https://www.clipsandfasteners.com/Default.asp

 

[19Eclipse90]

Hi, a while back you gave me a link to a file to 3D print the rear interior clips in a 1G. At the time I didn’t know anyone with a printer but now I do. When I follow the link now, I find other 3D printed parts but not that one. Do you still have access to that file?

It’s still there: 3D Part Files - post #21.

 

[bab96a]

Perfect. Thanks!