Inerior Door Panel Q:?

[Flat Tire]

ok for some reason all my buttons on my drivers side door just kinda sunk down...so i took out the screw behind the door handle and the one in the finger grip thing... but what other ones do i need to take out?...or can some one walk me through on what i have to do to tighten what ever loosened on my button controll thing. inside my door thanks
-Mike
(PS it's a 98 gsx)

 

[dynatos]

there are screws on the right and left side of the panel too (the heads are coverred with plastic covers - just pop them off with a screw driver). With those, and the two middle screws you just need to pop the bottom then top off and the whole panel comes off.

The button assembly is held by two screws to the actual panel - just unplug the harness and fix what broke.

 

[Flat Tire]

thanks man! is this a common problem?

 

[Attack Eagle]

never seen it before...

while you are in there if you have "floppy" or rattling windows when you close the door this is your chance to fix them by putting all 4 bolts back in.

 

[MaNGiNa24]

thanks man! is this a common problem?

Happened to both sides of mine.

Mine was due to stripped screws, i fixed it with an assload of superglue/epoxy.

 

[dynatos]

do this too:

http://dsmtuners.com/forums/showthread.php?t=57412